艾力高放熱焊接CADWELD

CADWELD放熱放接

    艾力高在1938年開發了CADWELD放熱焊接工藝，現在CADWELD焊接作為最終的電力連接已經被業界廣泛地接受。

可靠性

    由于分子焊接能消除表面接觸，電解質等不會滲透到導體交界面上從面導致氧化和并隨時間老化

能承受大電流沖擊

    由于CADWELD材料的熔化溫度要高于銅的熔點（1082℃）。所以，在由于大的故障電流導致的非常溫升時，導體本身會先比接頭處先熔化。

導電率

    由于CADWELD放熱焊接是真正的分子焊接，導體不會被破壞并且沒有接觸面，導體交界面的整體有效性沒有改變。

For through cable connections to the side of ground rods, there has never been a faster or easier way to make a reliable CADWELD® connection. The two-piece GY mold lets you make connections in a trench in about half the time it would take with compression connections or other exothermic connections and at a fraction of the cost.

GY molds are simple to use and provide for easy cable alignment. The molds include a baffle mold cover that reduces emissions and extends handle clamp life. 

Features

• Ergonomic two-piece molds use standard L160 and L159 handle clamps - the same clamps you use with other CADWELD® molds
• Saves labor costs. A GY connection can be made by one person in about one minute - much faster than other methods
• Simple to use
• Easy cable alignment
• Includes a new baffle mold cover which reduces emissions and extends the handle clamp life
• Available with wear plates 

 Applications

More Information